NTC3 Ver. 2 Parts

#2319 NTC3 Ver. 2 Upgrade Kit, molded composite parts.

Parts for version 2 NTC3 rear end:

#2237 NTC3 Rear Shock Tower Ver. 2 .............. $5.00*
#2238 NTC3 Rear Suspension Arms Ver. 2, 2 ....... $8.00*
#2268 NTC3 Rear Hub Carriers Ver. 2, 2 .......... $5.00*
#2271 NTC3 Rear Turnbuckle Eyelet & Balls, set .. $7.50
#2275 NTC3 Front/Rear Arm Mounts Ver. 2, 2 ...... $5.00*
#2283 NTC3 Rear Turnbuckle .825", 2 ............. $5.00*
#2308 NTC3 M3 x 18mm BHSC, 6 .................... $2.00
#2309 M3 Nyloc Nut, 6 ........................... $2.00

* These parts are not for the #2030, 2031, 2040 NTC3s with earlier suspension.

Version 2 Features

Camber is now adjusted by the turnbuckle at top.

Adjust rear toe-in by turning the forward-most screw through the wheel.

Adjust rear track width by turning the rear-most screw through the rear wheel. Use the track width gauge (shown) to establish standard track setting.

Two-Speed Shoes

The #2290 two-speed shoes are now slotted. Through the slots, you can now see the springs compress, allowing you to eliminate guesswork and back off the screw consistently.